Removal And Installation: Removal
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This Component Also Functions As The Brake Pedal Switch.
Remove The Driver's Side Footwell Trim Panel.
- Carefully Release The 3 Clips.
Release The Brake Switch.
- Rotate Clockwise Approximately 30 Degrees.
- Carefully Release The Clip.
- Disconnect The Electrical Connector.
CAUTION:
Removal Of The Clips Is A Delicate Procedure, Damage Will Occur If Any Force Is Used.