Warning/Message Display
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
Warning and information messages are displayed in the central area of the LCD. When no messages are required, an analogue clock is present on the display.
The message display language can be changed by the driver using a selection menu on the TSD (touch screen display).
The following table shows the possible messages which can be displayed, other visual or audible warnings and a description of the message.
| MESSAGE | OTHER WARNINGS | REASON | ACTION |
|---|---|---|---|
| DSC ON | DSC warning indicator flashes for a short time. | Displayed for a short time when the DSC switch is operated to activate the DSC system. | None. |
| DSC OFF | DSC warning indicator illuminated. | Displayed for a short time when the DSC switch is operated to de-activate the DSC system. | None. |
| TRAC DSC | DSC warning indicator illuminated. | Displayed for a short time when the DSC switch is operated to activate the TRAC DSC system. | None. |
| DSC NOT AVAILABLE | DSC warning indicator illuminated. | A fault is present in the DSC system. | A fault has occurred in the DSC system. Interrogate ABS (anti-lock brake system) module for faults and diagnose fault using a Jaguar approved diagnostic system. |
| BRAKE FLUID LOW |
|
Brake fluid level has become low and activated low level switch. | Investigate fluid loss and check brake system for leaks. Repair system as required and replenish brake fluid reservoir. |
| ABS FAULT |
|
A fault is present in the ABS system. Braking system will operate but ABS will not be available. | A fault has occurred in the ABS system. Interrogate ABS module for faults and diagnose fault using a Jaguar approved diagnostic system. |
| BRAKE ASSIST FAULT | Amber warning triangle illuminated in LCD. | A fault is present in the braking system preventing brake assist operation. Braking system will operate but brake assist will not be available and increased effort on the brake pedal may be required. | A fault has occurred in the brake assist system. Interrogate ABS module for faults and diagnose fault using a Jaguar approved diagnostic system. |
| EBD FAULT | Red warning triangle illuminated in LCD. | A fault is present in the braking system preventing EBD (electronic brake force distribution) operation. Braking system will operate but EBD will not be available. | A fault has occurred in the EBD system. Interrogate ABS module for faults and diagnose fault using a Jaguar approved diagnostic system. |
| PARK BRAKE APPLIED | None | Parking brake has been applied when the vehicle moving at a speed 5 km/h (3 mph) or above. | None. |
| PARK BRAKE FAULT |
|
A fault is present in the parking brake system. | A fault has occurred in the parking brake system. Interrogate the parking brake module for faults and diagnose using a Jaguar approved diagnostic system. |
| APPLY FOOT AND PARK BRAKE | Amber warning triangle illuminated in LCD. | The battery has been disconnected or power supply interrupted to the parking brake module. | Apply foot brake and parking brake to reset the parking brake module. |
| CANNOT APPLY PARK BRAKE |
|
A fault is present in the parking brake system and the parking brake cannot be applied. | A fault has occurred in the parking brake system. Interrogate the parking brake module for faults and diagnose using a Jaguar approved diagnostic system. |
| CHECK TYRE PRESSURE |
|
A tire pressure has decreased to below the warning threshold. | Check tires for punctures and re-inflate to correct pressures. |
| TYRE NOT MONITORED |
|
|
|
| CHECK ALL TYRE PRESSURES |
|
One or more tire pressures have decreased to below the warning threshold. |
|
| TYRE PRESSURE SYSTEM FAULT |
|
|
A fault has occurred in the TPMS. Interrogate the TPMS module for faults and diagnose using a Jaguar approved diagnostic system. |
| TYRE PRESSURE LOW FOR SPEED |
|
TPMS has detected current tire pressures are too low for sustained high speed driving | Check tire pressures and inflate to the correct pressures if necessary. |
| TYRE PRESSURE SYSTEM FAULT |
|
|
A fault has occurred in the TPMS. Interrogate the TPMS module for faults and diagnose using a Jaguar approved diagnostic system. |
| ENGINE OVERHEATING | Red warning triangle illuminated in LCD at temperatures of 119.4°C (247°F) or above. | Engine coolant temperature has exceeded threshold for normal engine operation. |
|
| RESTRICTED PERFORMANCE | Red or amber warning triangle illuminated in LCD depending on nature of power loss. | A fault has occurred which has reduced engine power output. | Investigate cause of engine power loss. Interrogate control modules for faults and diagnose using a Jaguar approved diagnostic system. |
| ENGINE SYSTEMS FAULT |
|
|
|
| CHECK FUEL FILLER CAP |
|
Tank Leakage Detection system has detected fuel filler cap has not been correctly installed or the system has a leak. | Check fuel filler cap to ensure is it correctly installed and secure or check the fuel system for leakage. |
| ENGINE TEMPERATURE INDICATION FAULT | Red warning triangle illuminated LCD. | A fault has occurred in the engine management system and the engine temperature signal is no longer being received. | Investigate cause of engine temperature failure. Interrogate ECM for faults and diagnose using a Jaguar approved diagnostic system. |
| GEARBOX FAULT | Battery symbol and amber warning triangle illuminated in LCD. | TCM has detected a fault in the transmission. Transmission may default to 'limp home' mode and only allow limited operation of forward gears and reverse. | Investigate transmission fault. Interrogate TCM and diagnose fault using a Jaguar approved diagnostic system. |
| BATTERY NOT CHARGING | Red warning triangle illuminated in LCD. | Charge output from generator not detected by ECM. | Investigate cause of generator failure. |
| OVER 120 km/h |
|
Vehicle has exceeded the preset 120 km/h speed value. | Reduce vehicle speed. |
| COOLANT LEVEL LOW | Red warning triangle illuminated in LCD. | Coolant level in expansion tank has fallen below minimum level. |
|
| BRAKE PADS LOW | Amber warning triangle illuminated LCD. | Brake pads have reached the service limit. | Replace brake pads. |
| SERVICE REQUIRED IN XXXX MILES/km | Amber warning triangle illuminated LCD. | If the vehicle is within 3, 200 kilometers (1, 988 miles) of a service, the message center will display this message. The displayed distance will decrease in increments of 50 km (31 miles). | None. |
| SERVICE REQUIRED | Amber warning triangle illuminated LCD. | This is displayed if the distance to next service drops below 1 km (0.6 miles). | Vehicle requires service. |
| RESETTING SERVICE MODE | Amber warning triangle illuminated LCD. | Displayed during the service reset procedure. | None. |
| SERVICE MODE RESET | Amber warning triangle illuminated LCD. | Displayed when the service rest procedure has been successful. | None. |
| WINTER MODE CONFIRMED | Snow mode symbol illuminated LCD. | Displayed when snow mode has been selected. | None. |
| DYNAMIC MODE CONFIRMED | Dynamic mode symbol illuminated LCD. | Displayed when dynamic mode has been selected. | None. |
| MODE CHANGE IN PROGRESS | None or snow mode symbol illuminated or dynamic mode symbol illuminated LCD LCD | Displayed when the driver has selected an alternative JaguarDrive mode. | None. |
| RECOMMEND WINTER MODE FOR CONDITIONS | None or dynamic mode symbol illuminated LCD | Displayed when the JaguarDrive senses excessive wheel slip. | Select winter mode. |
| WINTER MODE OFF | None. | Confirmation that winter mode has been deselected. | None. |
| DYNAMIC MODE OFF | None. | Confirmation that dynamic mode has been deselected. | None. |
| WINTER MODE FAULT | Amber warning triangle illuminated LCD. | A sub-system fault is present and the driver attempts to select a different JaguarDrive control mode. The message 'WINTER MODE FAULT' can also in very rare circumstances be generated by a fault in the JaguarDrive control module. | Investigate cause of message. Interrogate sub-system control modules for faults and diagnose using a Jaguar approved diagnostic system. If no sub-system fault is found, investigate JaguarDrive control module. |
| DYNAMIC MODE FAULT | Amber warning triangle illuminated LCD. | A sub-system fault is present and the driver attempts to select a different JaguarDrive control mode. The message 'DYNAMIC MODE FAULT' can also, in very rare circumstances, be generated by a fault in the JaguarDrive control module. | Investigate cause of message. Interrogate sub-system control modules for faults and diagnose using a Jaguar approved diagnostic system. If no sub-system fault is found, investigate JaguarDrive control module. |
| SPECIAL MODES NOT AVAILABLE | Amber warning triangle illuminated LCD. | A sub-system fault is present and the driver attempts to select a different JaguarDrive control mode. The message 'SPECIAL MODES NOT AVAILABLE' can also in very rare circumstances be generated by a fault in the JaguarDrive control module. | Investigate cause of message. Interrogate sub-system control modules for faults and diagnose using a Jaguar approved diagnostic system. If no sub-system fault is found, investigate JaguarDrive control module. |
| FUEL LEVEL LOW | Amber warning triangle illuminated LCD. | Fuel level in fuel tank has fallen below low fuel warning limit. | Replenish fuel tank. |
| FUEL PUMP SYSTEM FAULT | Amber warning triangle illuminated LCD. | Fuel pump or FPDM (fuel pump driver module) fault has occurred. | Investigate cause of fault. Interrogate ECM for faults and diagnose using a Jaguar approved diagnostic system. |
| WASHER FLUID LOW | Amber warning triangle illuminated LCD. | Fluid level has fallen below low level switch in windshield washer reservoir. | Replenish reservoir. |
| DOOR OPEN | Red text is illuminated in LCD and vehicle view showing open luggage compartment lid is displayed. | Door is open or incorrectly closed. | Close open door. |
| BOOT OPEN | Red text is illuminated in LCD and vehicle view showing open door location is displayed. | Luggage compartment lid is open or incorrectly closed. | Close open luggage compartment lid. |
| BONNET OPEN | Red text is illuminated in LCD and vehicle view showing open door location is displayed. | Hood is open or incorrectly closed. | Close open hood. |
| COLUMN ADJUST | None. | Manual column adjust has been selected on steering column adjustment switch. | None. |
| COLUMN ADJUST AUTO | None. | Automatic column adjust has been selected on steering column adjustment switch. | None. |
| MEMORY 1/2/3 SETTINGS RECALLED | None. | Memory button has been pressed to recall memory positions for seat, steering column and mirrors. | None. |
| MEMORY 1/2/3 SETTINGS SAVED | None. | Memory has been saved for one of the memory button positions. | None. |
| SEAT BELT MINDER | None. | Engine has been started and driver and/or front passenger seat belt has not been fastened. | Fasten seat belt(s). |
| CHECK PEDESTRIAN SYSTEM | Red warning triangle illuminated in LCD. | A fault has occurred with the pedestrian protection system or the system has activated. | Investigate cause of fault. Interrogate pedestrian protection system control module for faults and diagnose using a Jaguar approved diagnostic system. |
| INERTIA SWITCH TRIPPED | Amber warning triangle illuminated LCD. | Message appears when the crash status signal from the RCM (restraints control module) changes to crash detected or a fault in the restraints system prevents the message from being transmitted. | RCM can be rest with an ignition on/off cycle. If fault has occurred, then investigate cause of fault and interrogate the RCM for faults and diagnose using a Jaguar approved diagnostic system. |
| VALET MODE | None. | Confirmation that valet mode has been entered. | None. |
| VEHICLE ARMED | None. | Confirmation that alarm and immobilization has been achieved. | None. |
| SMART KEY NOT FOUND PLEASE INSERT IN SLOT | Red warning triangle illuminated in LCD. | Smart key has not been detected by the passive system inside the vehicle. | Smart key not present in vehicle. May be caused by a flat smart key battery. Replace internal battery in smart key. May also be due to a communications problem. |
| CHECK SMART KEY | None. | The smart key detected is not the correct smart key for the vehicle. | Use the correct smart key coded to the vehicle. |
| REMOVE SMART KEY | None. | Smart key is in the start control module and has been recognized by the passive start system. | Remove smart key from the start control module. |
| SMART KEY BATTERY LOW | None. | Battery voltage in smart key is becoming low, resulting in a decrease in effective range of the smart key transmitter. | Replace smart key internal battery. |
| PRESS BRAKE WHEN STARTING | None. | The stop/start button has been pressed without the brake pedal depressed. This will turn on the ignition power mode 6. | To start engine, press brake pedal, then press stop/start button. |
| GEARBOX NOT IN PARK | None. | The transmission is not in the 'park' position. Engine starting will be prohibited until 'park' is selected. | Put transmission in the park position. |
| STEERING COLUMN LOCKED | Red warning triangle illuminated in LCD. | Fault has occurred preventing the steering column lock from unlocking. This will also prevent the engine from starting. | Press the stop/start button to return to accessory mode 4. If steering column is still locked, investigate cause of fault and interrogate the CJB (central junction box) for faults and diagnose using a Jaguar approved diagnostic system. |
| IGNITION ON | Red warning triangle illuminated in LCD. | Stop/start button has been pressed without the brake pedal depressed. Ignition is now in power mode 6. | None. |
| ENGINE STOP BUTTON PRESSED | Red warning triangle illuminated in LCD. | Engine stop button has been pressed when the vehicle is moving. Engine will not be switched off until button is pressed quickly for a second time. | Do not stop engine when vehicle is moving unless necessary. |
| LIGHTS ON | Amber warning triangle illuminated LCD. | Side lamps or headlamps are on and the driver's door has been opened. | Switch off headlamps to avoid excessive drain on battery. |
| LIGHTS OFF | None. | Sunload/Light sensor detects low light conditions and exterior lights are not in AUTO mode. | Turn exterior lights on. |
| AUTOLAMP DELAY OFF | None. | Autolamp delay feature has been deactivated by moving light control switch from the auto position. | None. |
| AUTOLAMP DELAY XX:XX | None. | Lighting control switch has been moved to one of the 4 autolamp delay positions. Message displays delay timer period selected. | None. |
| AUTOLAMP DELAY | None. | Autolamp delay is selected on the light control switch and the driver has switched off ignition and opened driver's door initiating the autolamp delay. | None. Message will extinguish once the selected delay timer has switched off the headlamps. |
| TAIL LAMP FAILURE | None. | The tail lamp LED (light emitting diode)'s are not functioning correctly. Location shown on vehicle image. | Correct fault in rear lamp assembly, RJB (rear junction box) or wiring. |
| BRAKE LAMP FAILURE | None. | The brake lamp LED's are not functioning correctly. Location shown on displayed vehicle image. | Correct fault in rear lamp assembly, RJB or wiring. |
| INDICATOR LAMP FAILURE | None. | A turn signal indicator bulb has failed. Location is shown on displayed vehicle image. | Replace failed turn signal indicator bulb. |
| HOOD NOT LATCHED | Red warning triangle illuminated in LCD. | Convertible top not latched correctly. System not seeing correct switch state for header latch or tonneau latch switches. | Correct fault in switches, wiring or tonneau latch setting. |
| HOOD OUT OF POSITION | Amber warning triangle illuminated in LCD. | Finger removed from switch mid cycle or roof unable to complete cycle due to a switch or wiring fault. | Reset roof, if fault persists identify and resolve. |
| LUGGAGE COVER OUT OF POSITION | Amber warning triangle illuminated in LCD. | Luggage separator not fixed in luggage compartment to allow roof operation. | Fit luggage separator in fully deployed position. |
| FORWARD ALERT SENSOR BLOCKED | Amber warning triangle illuminated in LCD. | Forward collision warning radar blocked. | Remove obstruction or clean radar sensor. |
| FORWARD ALERT FAULT | Amber warning triangle illuminated in LCD. | Forward collision warning system fault. | Investigate cause of message. Interrogate system control modules for faults and diagnose using a Jaguar approved diagnostic system. |
| FORWARD ALERT UNAVAILABLE | Amber warning triangle illuminated in LCD. | Forward collision warning system fault. | Investigate cause of message. Interrogate system control modules for faults and diagnose using a Jaguar approved diagnostic system. |
| ADAPTIVE DYNAMICS FAULT | Amber warning triangle illuminated in LCD. | Adaptive dynamics system fault. Suspension will default to the hardest setting. | Investigate cause of message. Interrogate system control modules for faults and diagnose using a Jaguar approved diagnostic system. |
| E_DIFF NOT AVAILABLE | Amber warning triangle illuminated in LCD. | Electronic differential system not available. | Investigate cause of message. Interrogate system control modules for faults and diagnose using a Jaguar approved diagnostic system. |
| E_DIFF FAULT | Amber warning triangle illuminated in LCD. | Electronic differential system fault. | Investigate cause of message. Interrogate system control modules for faults and diagnose using a Jaguar approved diagnostic system. |
| ENGINE OIL LOW | Amber warning triangle illuminated in LCD. | Engine oil level low. | Top up oil level. |
| ENGINE OIL HIGH | Amber warning triangle illuminated in LCD. | Engine oil level too high. | Reduce oil to recommended level before running engine again. |
| ENGINE OIL CRITICALLY LOW | Red warning triangle illuminated in LCD. | Engine oil level very low. | Top up oil level. |
| ENGINE OIL LEVEL MONITOR SYSTEM FAULT | Amber warning triangle illuminated in LCD. | Engine oil level monitoring system fault. | Investigate cause of message. Interrogate system control modules for faults and diagnose using a Jaguar approved diagnostic system. |