Removal And Installation: Removal
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Refer to: Battery Disconnect and Connect (General Procedures).
-
WARNING: Do not work on or under a vehicle supported only by a jack.
Always support the vehicle on safety stands.
Raise and support the vehicle.
- Evacuate the air conditioning (A/C) system.
Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging (Climate Control System - General Information, General Procedures).
- Refer to: Cooling System Partial Draining and Vacuum Filling (General Procedures).
- Refer to: Hood (Body Closures, Removal and Installation).
- Refer to: Air Cleaner Outlet Pipe LH (Intake Air Distribution and Filtering - V8 5.0L Petrol, Removal and Installation).
- Refer to: Air Cleaner Outlet Pipe RH (Intake Air Distribution and Filtering - V8 5.0L Petrol, Removal and Installation).
- Refer to: Radiator Splash Shield (Front End Body Panels, Removal and Installation).
Torque Specification: 25 Nm
Torque Specification: 23 Nm
-
CAUTION: Make sure to protect the paintwork.
Torque Specification: 30 Nm
Torque Specification: 5 Nm
Torque Specification: 9 Nm
-
CAUTION: Make sure that all openings are sealed. Use new blanking caps.NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
Torque Specification: 8 Nm