LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (Acceleration Control -- XK/X150) >> Acceleration Control >> Accelerator Pedal >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the throttle pedal assembly.
    • Connect the electrical connector.
    • Install the Torx screws.
  2. Install the driver's side footwell trim panel.
    • Carefully align and secure the clips.
scientia non olet · About LEMON Manuals