LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Pre-Delivery Inspection Manual -- XK/X150) >> Pre-Delivery Inspection Manual >> Road Test >> Description And Operation >> On The Road

On The Road

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.

Optimum braking efficiency is only achieved after bedding in brake disc/pads. It is important to avoid repeated hard use of the brakes during the PDI road test.

The road test is the only opportunity to assess the quality of ride, handling, general performance and noise levels under differing traffic and road conditions. Every care must be taken to make sure the vehicle performs to the standard of excellence expected by Jaguar customers.

Check the following:

All gear changes in automatic and manual modes are smooth:

When in automatic mode check that the message center displays 'P R N D S  ', and that the current Jaguar Drive selection position is highlighted.

Check that the manual gear change operates correctly both in the 'D  ' and 'S  ' positions when the steering column shift paddles are used.

Also check that when the shift paddle is operated, the message center displays the manual gear ranges as '1 2 3 4 5 6  ' and the current Jaguar Drive selection is highlighted.

NOTE: Refer to the relevant Service Information - Description & Operation, for full Jaguar sequential shift mode details.