Adaptive Speed Control Switch Pack
SPEED ADJUSTMENT + OR - (1) - press the speed adjustment hard button to switch the speed control on and set the speed, or increase/decrease the set speed (without using the accelerator). Speeds above approximately 34 km/h (21 mph) may be set.
GAP <-> (2) - press to decrease/increase the gap to the vehicle ahead. Four gap settings are available.
CANCEL (3) - press to cancel speed control but retain the set speed in memory.
RESUME (4) - press to resume the set speed retained in memory.
When the system is switched on, the current set speed is displayed on the message center.
Pressing the brake pedal while in speed control disengages the system in the same way as using the CANCEL hard button.
If the vehicle is accelerated above the set speed, the set speed is resumed when the accelerator pedal is released.