Recalibrate Throttle Pedal
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
After battery re-connection, the engine management system loses the throttle pedal position adaptive setting. This must be re-learned, with the engine running at idle and the throttle pedal in the 'idle/foot off' position.
Re-program the engine management control module as follows:
- With the engine running at idle, press and hold the brake pedal for 7 seconds.
- Release the brake pedal and switch off the engine.
NOTE:
There is no requirement to press the throttle pedal during the calibration routine. The engine management system only requires to learn the throttle pedal 'idle/foot-off' position.
Pressing and holding the brake pedal for 7 seconds will initiate the engine management system to relearn the throttle pedal position.
Pressing and holding the brake pedal for 7 seconds will initiate the engine management system to relearn the throttle pedal position.