LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Pre-Delivery Inspection Manual -- XK/X150) >> Pre-Delivery Inspection Manual >> Preliminary >> Description And Operation >> Check/Top-Up Coolant >> Check and Top-Up Procedure

Check and Top-Up Procedure

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the coolant level is between the 'MIN' and 'MAX'  marks located on the outside of the reservoir.
  2. If the fluid level is below the 'MIN' mark, clean the area around the reservoir cap and neck thoroughly with lint free cloth. Remove the reservoir cap.
  3. Replenish the reservoir with the correct mix of coolant until the level is between the 'MIN' and 'MAX'  marks.
  4. Install the reservoir cap and hand-tighten. Clean up all spilled coolant.
scientia non olet · About LEMON Manuals