LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Pre-Delivery Inspection Manual -- XK/X150) >> Pre-Delivery Inspection Manual >> Preliminary >> Description And Operation >> Check/Top Up Windshield Washer Reservoir >> Check and Top-Up Procedure

Check and Top-Up Procedure

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the washer reservoir cap and check that the fluid level is just below the filler neck.
  2. If required, fill the reservoir with diluted Jaguar windscreen washer fluid to the strength shown on the bottle, for the ambient temperature. Close the washer fluid reservoir cap and clean up any spilled fluid.
    NOTE:
    • Dilute the Jaguar windscreen washer fluid in accordance with the manufacturers instructions printed on the bottle.
    • Always use Jaguar windscreen washer fluid. Use of a non-approved fluid may adversely affect the wiper blade rubber, resulting in ineffectual and noisy operation.
scientia non olet · About LEMON Manuals