Description And Operation: General

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.

This Pre-Delivery Inspection Manual (PDI) is applicable to the new Jaguar XK. The purpose of the Pre-Delivery Inspection is to make sure the customer receives a vehicle that is built and prepared to the highest possible standard.

Where possible, the PDI manual is organized to make the PDI a more fluid and continuous process. This will allow the person conducting the PDI to prepare the vehicle in a more efficient manner.

References in the document text to Right-hand (RH) or Left hand (LH) side refer to the location of components when viewed from the driver's seat and facing forward. Other references where RH or LH are used in text, are to describe the location of an item on/or within a component when facing the component.

Other references in the document text refer to the specification of the engine; Normally aspirated (N/A), and Supercharged (S/C).

Before starting the PDI, Service Bulletins must be checked for the latest information.

A vehicle is NOT to be publicly displayed until the Pre-Delivery Inspection (PDI) has been conducted.

Make sure vehicle body protectors and internal protection covers are available.

WARNING: Changes MUST NOT be made to the default vehicle configuration settings, unless the pre-sale 'New Vehicle Configuration Options' sheet specifically advises to do so.