Removal And Installation: Installation
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
- Install a new O-ring seal.
- Install the brake master cylinder.
- Tighten the nuts to 25 Nm (18 lb.ft).
- Connect the brake master cylinder lines.
- Tighten the brake line unions to 17 Nm (13 lb.ft).
- Connect and secure the electrical connector.
- Tighten the bolt.
- Install the brake fluid reservoir.
For additional information, refer to: BRAKE FLUID RESERVOIR (Removal And Installation).