Removal And Installation: Installation
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the components.
- Install the brake fluid reservoir.
- Install new brake fluid reservoir seals.
- Tighten the Torx bolt to 6 Nm (4 lb.ft).
- Connect the low brake fluid warning indicator switch electrical connector.
- Bleed the brake system.
For additional information, refer to: Brake System Bleeding (General Procedures).
- Install the air intake cover.
- Carefully secure the clips.