LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Handles, Locks, Latches & Entry Systems -- XK/X150) >> Handles, Locks, Latches And Entry Systems >> Radio Frequency (RF) Receiver >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the keyless vehicle antenna.
    • Connect the electrical connector.
    • Tighten the Torx bolts to 3 Nm (2 lb.ft).
  2. Connect the battery ground cable and install the cover.

    For additional information, refer to: Battery Disconnect And Connect Specifications (414-00, Specifications).