LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Handles, Locks, Latches & Entry Systems -- XK/X150) >> Handles, Locks, Latches And Entry Systems >> Luggage Compartment Lid Lock Cylinder >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the luggage compartment lid lock cylinder.
    • Install the bolt.
    • Tighten the Torx bolt to 3 Nm (2 lb.ft).
  2. Connect the luggage compartment lid latch operating cable to the lock cylinder.
    • Install the cable.
  3. Remove the luggage compartment lid trim panel.
scientia non olet · About LEMON Manuals