LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Handles, Locks, Latches & Entry Systems -- XK/X150) >> Handles, Locks, Latches And Entry Systems >> Liftgate Lock Cylinder >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the liftgate lock cylinder.
    • Install the liftgate lock cylinder housing.
    • Fit and tighten the Torx screw.
    • Attach the liftgate lock cylinder cable.
  2. Install the liftgate lower trim panel.

    For additional information, refer to: Liftgate Lower Trim Panel

scientia non olet · About LEMON Manuals