LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Engine - V8 N/A 5.0L Petrol -- XK/X150) >> Engine - V8 N/A 5.0L Petrol >> Crankshaft Front Seal >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2015 Jaguar XK, 2014 Jaguar XK, 2013 Jaguar XK, and 2012 Jaguar XK. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION:
    • Do not over tighten the crankshaft front seal. Failure to follow this instruction may result in damage to the vehicle.
    • Take extra care not to damage the seal.

  1. To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals