LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Front End Body Panels -- XK/X150) >> Front End Body Panels >> Cowl Vent Screen (G528245) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Always protect paintwork and glass when removing exterior components.
  1. G11512049

    Remove the air intake cover.

    • Remove the 3 clips.
  2. G11511264

    Remove the brake master cylinder cover.

    • Remove the 4 clips.
  3. Remove the windshield wiper arms.

    For additional information, refer to: Wiper Pivot Arm (Removal and Installation).

  4. G11512050

    Remove the plenum chamber panel.

    • Release the retaining clip.
    • Release the 3 clips.
    • Disconnect the washer jet hose.
scientia non olet · About LEMON Manuals