LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Front End Body Panels -- XK/X150) >> Front End Body Panels >> Cowl Vent Screen (G528245) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the plenum chamber panel.
    • Connect the washer jet hose.
    • Carefully secure the clips.
  2. Install the air intake cover.
    • Carefully secure the clips.
  3. Install the brake master cylinder cover.
    • Carefully secure the clips.
  4. Install the windshield wiper arms.

    For additional information, refer to: Wiper Pivot Arm (Removal and Installation).

scientia non olet · About LEMON Manuals