LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel & Console >> Instrument Panel And Console >> Removal And Installation >> Instrument Panel Lower Trim Panel >> Installation

Instrument Panel Lower Trim Panel: Installation

  1. Install the rheostat switch assembly and align the instrument panel lower trim panel.
    • Secure the switch assembly clips.
    • Connect the switch assembly electrical connector.
  2. Install the instrument panel, lower trim panel.
    • Install and secure the diagnostic socket.
    • Align the clips.
    • Install the Torx screws.
    • Install the Torx bolts and tighten to 6 Nm (4 lb.ft).
  3. Install the MOST diagnostic port.
    • Secure the clip.
  4. Install the driver's side footwell trim panel.
    • Carefully align and secure the clips.
  5. Install the instrument panel driver's side reinforcement trim panel.
    • Align the pegs and secure with the clips.
  6. Install the instrument panel end trim panel.
    • Release the door aperture seal.
    • Carefully align and secure the clips.
    • Install the aperture seal.
scientia non olet · About LEMON Manuals