LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XJ Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XJ/X351 >> Engine Cooling - V8 5.0L Petrol/V8 S/C 5.0L Petrol >> Removal And Installation >> Coolant Expansion Tank (G1269155) >> Removal

Coolant Expansion Tank (G1269155): Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING:
    • Release the cooling system pressure by slowly turning the coolant expansion tank cap a quarter of a turn. Cover the expansion tank cap with a thick cloth to prevent the possibility of scalding. Failure to follow this instruction may result in personal injury.
    • Be prepared to collect escaping fluid.
    CAUTION:
    • Since injury such as scalding could be caused by escaping steam or coolant, make sure the vehicle cooling system is cool prior to carrying out this procedure
    • Correct installation of the coolant expansion tank cap can be obtained by tightening the cap until 3 audible clicks are heard.
    G11287763
  2. Using a syringe, remove the cooling fluid from the expansion tank.
  3. G11287823
  4. G11287824
  5. G11287825
  6. CAUTION: Be prepared to collect escaping coolant.
G11287826
scientia non olet · About LEMON Manuals