LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XJ Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Noise, Vibration & Harshness -- XJ/X351 >> Noise, Vibration And Harshness >> Diagnosis And Testing >> Pinpoint Tests >> Pinpoint Test E: Non-Axle Noise

Pinpoint Test E: Non-Axle Noise

  1. E1: INSPECT VEHICLE TRIM 
    1. Check the grille and trim mouldings to see if they are the source of the noise.

    Are the vehicle trim components causing the noise?

  2. E2: CHECK THE A/C SYSTEM FOR NOISE 
    1. Check the A/C system components for noise by turning the A/C system on and off.

    Is the A/C system causing the noise?

    • Yes  : Diagnose the A/C system.

      Refer to LIFTING .

    • No  : GO to  E3.
  3. E3: CHECK NON-FACTORY ACCESSORIES 
    1. Inspect any accessories for being the source of the noise. Example: grounding body-to-frame, antennas, visors, bug deflectors and fog lights?

    Are the accessories the cause of the noise?

    • Yes  : Adjust, repair or install new accessories or fasteners as required.
    • No  : Verify the customer concern.