Fuel Filler Pipe Assembly
WARNING: This page is about a different car, the 2010 Jaguar XF and 2009 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
Fuel Filler Pipe - NAS
| Item Number | Description |
|---|---|
| 1 | Anti-trickle valve assembly |
| 2 | Wide bore filler neck |
| 3 | Fuel cap |
| 4 | Fuel cap lanyard |
| 5 | DMTL breather hose |
| 6 | DMTL breather filter |
| 7 | Fuel filler pipe |
| 8 | Connection of leak pipe to tank vapor line |
| 9 | Connection to charcoal canister |
| 10 | DMTL vapor leak pipe |
| 11 | Fuel filler hose |
| 12 | Hose connection with fuel tank inlet check valve |
The fuel filler head is positioned at the rear of the vehicle, above the right hand rear wheel. The filler head is covered by a molded plastic cover which is electrically locked when the vehicle is locked. The filler cap is a conventional screw in type which is secured to the vehicle with a lanyard.
The filler head is stainless steel fabrication which is secured to the vehicle body with 2 brackets and a location lug on the filler bowl. The formed pipe locates in a short flexible hose attached to the tank which is secured with worm drive clamps at each end.