Headlamp Adjustment (G1225247)
| 86.40.18 | HEADLAMPS - VEHICLE SET - ALIGN BEAMS | NAS | 0.2 |
| 86.40.18 | HEADLAMPS - VEHICLE SET - ALIGN BEAMS | NON NAS | 0.2 |
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
- Make sure to check and adjust the tyre pressures to the correct level.
Park the vehicle on a horizontally level surface.
- Align the headlamp beam setting equipment to one headlamp. Headlamp beam setter
-
NOTE: The headlamp setting is 1 % below horizontal and parallel.
Check the headlamp beam alignment.
- Open the hood.
Adjust the headlamps with an Allen Key.
- To adjust the second headlamp, repeat the above procedure.