Fuel Filler Pipe (NAS)
WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Check valve assembly |
| 2 | Fuel filler neck |
| 3 | Fuel filler cap |
| 4 | Fuel filler cap lanyard |
| 5 | Diagnostic Module Tank Leakage (DMTL) breather hose |
| 6 | Diagnostic Module Tank Leakage (DMTL) filter |
| 7 | Fuel filler pipe |
| 8 | Diagnostic Module Tank Leakage (DMTL) pipe |
| 9 | Connection to charcoal canister |
| 10 | Hose clamp (2 off) |
| 11 | Fuel filler hose |
| 12 | Hose connection with fuel tank inlet check valve |
The fuel filler head is positioned at the rear of the vehicle, above the right rear wheel. The filler head is covered by a molded plastic cover which is electrically locked when the vehicle is locked. The filler cap is a conventional screw in type which is secured to the vehicle with a lanyard.
The filler head is stainless steel fabrication which is secured to the vehicle body with 2 brackets and a location lug on the filler bowl. The formed pipe locates in a short flexible hose attached to the tank which is secured with worm drive hose clamps at each end. The hose, in turn, connects with a fuel tank inlet check valve which prevents fuel within the tank re-entering the fuel filler hose and pipe.