Brake Booster (G1281300): Removal
NOTE:
- Removal steps in this procedure may contain installation details.
- LHD illustration shown, RHD is similar.
All vehicles
- For additional information, refer to: Battery Disconnect and Connect (General Procedures).
- For additional information, refer to: Brake Master Cylinder (Removal and Installation).
Right-hand drive vehicles
- For additional information, refer to: Secondary Bulkhead Panel RH (Removal and Installation).
Left-hand drive vehicles
- For additional information, refer to: Secondary Bulkhead Panel LH (Removal and Installation).
All vehicles
- For additional information, refer to: Speed Control Deactivator Switch (Removal and Installation).
- For additional information, refer to: Steering Column (Removal and Installation).
- For additional information, refer to: Steering Column Flexible Coupling (Removal and Installation).
Torque Specification : 3 Nm
Torque Specification : 25 Nm
-
NOTE: Replace the brake booster/pedal box gasket.
Discard the gasket.