LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2010 >> XFR >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Automatic Transmission/Transaxle - V6 S/C 3.0L Petrol AWD -- XF/X250) >> Automatic Transmission/Transaxle - V6 S/C 3.0L Petrol AWD >> Description And Operation >> Transmission Description - Overview (G1520681) >> Overview

Transmission Description - Overview (G1520681): Overview

WARNING: This page is about a different car, the 2015 Jaguar XF, 2014 Jaguar XF, and 2013 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.

The ZF 8HP70 transmission is an electronically controlled, hydraulically operated, 8 speed automatic unit. The hydraulic and electronic control elements of the transmission, including the TCM (transmission control module), are incorporated in a single unit located inside the transmission and is known as 'Mechatronic'.

The ZF 8HP70 transmission has the following features:

The higher fuel efficiency of the ZF 8HP70 automatic transmission is mainly due to the following modifications:

The transmission selections are made using the rotary JaguarDrive TCS (transmission control switch) in the floor console. Refer to External Controls - DIAGNOSIS AND TESTING .

The 3.0L V6 S/C engine features stop/start technology on some models. To complement this, the 8 speed transmission, on vehicles with stop/start technology, is fitted with a Hydraulic Impulse Storage (HIS) device to ensure ATF is available to the shift elements as quickly as possible when the engine is started.

Two versions of the 8HP70 transmission are available; one version is for RWD (rear wheel drive) vehicles and the second is for AWD (all-wheel drive) vehicles. The transmission internals of both transmissions are similar.