Right Camshaft Position Sensor (G1550188): Installation

WARNING: This page is about a different car, the 2015 Jaguar XF, 2014 Jaguar XF, and 2013 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Make sure that the sensor tip is clean and free of foreign material.

NOTE: Lubricate the O-ring seal with clean engine oil.
1. Install the Camshaft Position (CMP) sensor.
- Install the CMP sensor retaining bolt.
  Torque Specification: 10 Nm
- Connect the electrical connector.
Install the right side air cleaner outlet pipe.
Refer to: RIGHT AIR CLEANER OUTLET PIPE (G1549759) (V6 S/C 3.0L Petrol, Removal and Installation).