LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2010 >> XFR >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XF/X250) >> Electronic Engine Controls - V6 S/C 3.0 L Petrol >> Diagnosis And Testing >> Electronic Engine Controls DTC: Heated Oxygen Sensors (Ho2S) >> Drive Cycle >> Pre catalyst and Mid catalyst sensors

Pre catalyst and Mid catalyst sensors

WARNING: This page is about a different car, the 2015 Jaguar XF, 2014 Jaguar XF, and 2013 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.

Drive the vehicle until the engine is fully warm (greater than +80 ° C). The drive cycle should include driving the vehicle in a steady throttle condition at a road speed of 30 mph or above for a duration of at least 2 minutes. (Once functional the oxygen sensor output signal can be seen reacting to changes in engine speed/load or if the sensor is faulty a DTC(s) will be raised).