LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2010 >> XFR >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- XF/X250) >> Electronic Engine Controls - V6 S/C 3.0 L Petrol >> Description And Operation >> Electronic Engine Controls - System Operation And Component Description (G1791748) >> Camshaft Position (CMP) Sensors

Camshaft Position (CMP) Sensors

WARNING: This page is about a different car, the 2015 Jaguar XF, 2014 Jaguar XF, and 2013 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
G11417006

The CMP sensors are Magneto Resistive Element (MRE) sensors that allow the ECM to determine the angular position of the camshafts. MRE sensors produce a digital output which allows the ECM to detect speeds down to zero.

Four CMP sensors are installed in the front upper timing covers, one for each camshaft.

Each CMP sensor is secured with a single screw and sealed with an O-ring. On each CMP sensor, a three pin electrical connector provides the interface with the engine harness.

The head of each CMP sensor faces a sensor wheel attached to the front of the related VCT unit.

If an exhaust CMP sensor fails, the ECM disables the VCT of both exhaust camshafts.

If an intake CMP sensor fails, the ECM disables the VCT of both intake camshafts. This can result in the engine being slow, or failing, to start.

scientia non olet · About LEMON Manuals