LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2010 >> XFR >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Electronic Engine Controls - GTDI 2.0L Petrol -- XF/X250) >> Electronic Engine Controls - GTDI 2.0L Petrol >> Removal And Installation >> Engine Coolant Temperature Sensor (G1568894) >> Removal

Engine Coolant Temperature Sensor (G1568894): Removal

WARNING: This page is about a different car, the 2015 Jaguar XF, 2014 Jaguar XF, and 2013 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Make sure that all openings are sealed. Use new blanking caps.
  1. Refer to: Engine Cover - GTDi 2.0L Petrol (Interior Trim and Ornamentation, Removal and Installation).
  2. Refer to: Cooling System Partial Draining and Vacuum Filling (Engine Cooling - V6 S/C 3.0L Petrol, General Procedures).
  3. G11417194
  4. G11417195

    Torque Specification: 

    M6 10 Nm 

    M10 45 Nm 

  5. G11417196
  6. G11417197
  7. G11417198
  8. CAUTION: Be prepared to collect escaping coolant.
    NOTE: Lubricate the O-ring seal with clean coolant.
    G11417199
scientia non olet · About LEMON Manuals