LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2010 >> XFR >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Exhaust System - V6 S/C 3.0L Petrol -- XF/X250) >> Exhaust System - V6 S/C 3.0L Petrol >> Removal And Installation >> Right Catalytic Converter (G1569056) >> Removal

Right Catalytic Converter (G1569056): Removal

WARNING: This page is about a different car, the 2015 Jaguar XF, 2014 Jaguar XF, and 2013 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Observe due care when working near a hot exhaust system.
NOTE: Removal steps in this procedure may contain installation details.

All vehicles 

  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: Air Deflector (Front End Body Panels, Removal and Installation).
  3. G11423930

    Torque Specification  : 40 Nm 

    2WD vehicles 

  4. G11423931
  5. G11423932

    4WD vehicles 

  6. G11423933
  7. G11423934
  8. G11423935
  9. G11423936

    All vehicles 

  10. CAUTION: Install a new clamp.
    G11423937

    Torque Specification  : 55 Nm 

  11. NOTE: Do not disassemble further if the component is removed for access only.
    G11423938

    Special Tool(s): 310-121

    Torque Specification: 48 Nm 

scientia non olet · About LEMON Manuals