LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2010 >> XFR >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake & Actuation -- XF/X250 >> Parking Brake Actuation >> Removal And Installation >> Parking Brake Cable RH - GTDI 2.0L Petrol/TD4 2.2L Diesel/TDV6 3.0L Diesel/V6 S/C 3.0L Petrol/V8 S/C 5.0L Petrol (G1086728) >> Removal

Parking Brake Cable RH - GTDI 2.0L Petrol/TD4 2.2L Diesel/TDV6 3.0L Diesel/V6 S/C 3.0L Petrol/V8 S/C 5.0L Petrol (G1086728): Removal

WARNING: Failure to release the tension and calibrate the electric parking brake during rear parking brake related service procedures, could cause the parking brake to function incorrectly or become inoperative.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Parking Brake Cable Tension Release (G970792)  (General Procedures).
  2. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  3. Refer to: Rear Subframe - GTDi 2.0L Petrol/V6 S/C 3.0L Petrol/V8 S/C 5.0L Petrol (Uni-Body, Subframe and Mounting System, Removal and Installation).
  4. G11423674
  5. NOTE: Note the fitted position.
    G11423675
  6. G11423676

    Torque Specification: 20 Nm