G531320t35: CHECK THE SECONDARY APPLY SIGNAL CIRCUIT FOR OPEN CIRCUIT
- Electric parking brake switch (TL82) connector disconnected.
- Measure the resistance between:CONNECTOR REFERENCE CHART
CR32 connector, harness side TL82 connector, harness side Electric parking brake switch apply 2 - signal - Pin 02 Electric parking brake switch apply 2 - signal - Pin 07 - Is the resistance less than 10 ohms?
- Yes: GO to Pinpoint Test G531320T36 .
- No: REPAIR the open circuit. For additional information, refer to the wiring diagrams.