Lower Arm (64.35.43): Removal

All vehicles 

1. Make sure the park brake is in the off position.
2. Remove the wheel and tire.

   For additional information, refer to WHEEL AND TIRE (74.20.05) .

3. Detach the shock absorber assembly from the lower arm.
   Fig 1: Locating Shock Absorber Assembly Bolt

   Courtesy of JAGUAR CARS, INC.
4. Detach the stabilizer bar link.
   Fig 2: Locating Stabilizer Bar Link Bolt

   Courtesy of JAGUAR CARS, INC.

Vehicles without Brembo brakes 

CAUTION: The brake caliper must be supported at all times.
5. Detach the brake caliper and secure to one side.
   • Remove and discard the brake caliper retaining bolts.
     Fig 3: Locating Brake Caliper Retaining Bolts

     Courtesy of JAGUAR CARS, INC.

Vehicles with Brembo brakes 

CAUTION: The brake caliper must be supported at all times.
6. Detach the brake caliper and secure to one side.
   • Remove and discard the brake caliper retaining bolts.
     Fig 4: Locating Brake Caliper Retaining Bolts

     Courtesy of JAGUAR CARS, INC.

All vehicles 

7. Remove and discard the retaining clips and reposition the brake disc.
   Fig 5: Locating Brake Disc Retaining Clips

   Courtesy of JAGUAR CARS, INC.
8. Detach the lower arm from the wheel hub assembly.
   Fig 6: Locating Wheel Hub Assembly Bolt And Nut

   Courtesy of JAGUAR CARS, INC.
9. Remove the lower arm.
   Fig 7: Locating Lower Arm Retaining Bolts

   Courtesy of JAGUAR CARS, INC.