Rear Air Spring Lower Bushing (64.32.03): Installation

NOTE: Make sure the bush is clean and free from oil or grease.

NOTE: Use a suitable lubricant to allow the bush to locate into the special tool.

Fig 1: Locating New Bush In Special Tool

Courtesy of JAGUAR CARS, INC.

NOTE: Make sure the damper is clean and free from grease or oil and is not damaged prior to pushing in the new bush.

NOTE: Make sure the air spring and bush are placed in the correct orientation.

Fig 2: Aligning Bush To Air Spring Using Special Tools

Courtesy of JAGUAR CARS, INC.

NOTE: Make sure correct alignment is maintained.

Fig 3: Pushing bush into air spring until tool reaches stop

Courtesy of JAGUAR CARS, INC.

Slowly push the bush into the air spring until the tool reaches the stop.
Install the rear air spring.
For additional information, refer to Rear Air Spring - VIN Range: G00442->G45703 (60.32.10) .

For additional information, refer to Rear Air Spring - VIN Range: G45704->G99999 (60.32.10) .