G256924t77: CHECK THE AIR SPRING SOLENOID SUPPLY CIRCUIT FOR HIGH RESISTANCE
- Disconnect the air spring solenoid electrical connector, CR22.
- Measure the resistance between CR91, pin 01 (YG) and CR22, pin 06 (YG).
- Is the resistance greater than 5 ohms?
- -> Yes: REPAIR the high resistance circuit. For additional information, refer to the appropriate SYSTEM WIRING DIAGRAMS article. CLEAR the DTC. TEST the system for normal operation.
- -> No: Go to Pinpoint G256924t78: CHECK THE LEFT-HAND FRONT AIR SPRING SOLENOID DRIVE CIRCUIT FOR SHORT TO GROUND .