G256924t36: CHECK THE LEFT-HAND FRONT HEIGHT SENSOR SUPPLY CIRCUIT FOR SHORT TO GROUND
- Disconnect the ASU electrical connector, CR90.
- Measure the resistance between CR90, pin 01 (G) and GROUND.
- Is the resistance less than 10,000 ohms?
- -> Yes: REPAIR the short circuit. For additional information, refer to the appropriate SYSTEM WIRING DIAGRAMS article. CLEAR the DTC. TEST the system for normal operation.
- -> No: Go to Pinpoint G256924t37: CHECK THE LEFT-HAND FRONT HEIGHT SENSOR SUPPLY CIRCUIT FOR SHORT TO B+ .