LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2008 >> XJR >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Vehicle Dynamic Suspension (2003.5-09) >> Diagnosis And testing >> Vehicle Dynamic Suspension >> Pinpoint tests >> PINPOINT TEST G256924p15: C1460; ACCELEROMETER SENSOR SUPPLY CIRCUIT FAULT >> G256924t33: CHECK THE ACCELEROMETER SENSOR SUPPLY CIRCUIT FOR SHORT TO GROUND

G256924t33: CHECK THE ACCELEROMETER SENSOR SUPPLY CIRCUIT FOR SHORT TO GROUND

  1. Disconnect the ASU electrical connector, CR91.
  2. Measure the resistance between CR91, pin 16 (Y) and GROUND.
    • Is the resistance less than 10,000 ohms? 
  1. -> Yes:  REPAIR the short circuit. For additional information, refer to the appropriate SYSTEM WIRING DIAGRAMS article. CLEAR the DTC. TEST the system for normal operation.
  2. -> No:  Go to Pinpoint G256924t34: CHECK THE ACCELEROMETER SENSOR SUPPLY CIRCUIT FOR SHORT TO B+ .