G256924t31: CHECK THE FRONT ACCELEROMETER SIGNAL CIRCUIT FOR SHORT TO GROUND
- Disconnect the ASU electrical connector, CR89.
- Disconnect the accelerometer electrical connector, EC13.
- Measure the resistance between EC13, pin 02 (G) and GROUND.
- Is the resistance less than 10,000 ohms?
- -> Yes: REPAIR the short circuit. For additional information, refer to the appropriate SYSTEM WIRING DIAGRAMS article. CLEAR the DTC. TEST the system for normal operation.
- -> No: Go to Pinpoint G256924t32: CHECK THE FRONT ACCELEROMETER SIGNAL CIRCUIT FOR SHORT TO B+ .