G256924t22: CHECK THE LEFT-HAND FRONT AIR SPRING DRIVE CIRCUIT FOR HIGH RESISTANCE
- Disconnect the battery negative terminal.
- Disconnect the ASU electrical connector, CR89.
- Measure the resistance between EC47, pin 02 (BO) and CR89, pin 01 (BO).
- Is the resistance greater than 5 ohms?
- -> Yes: REPAIR the high resistance circuit. For additional information, refer to the appropriate SYSTEM WIRING DIAGRAMS article. CLEAR the DTC. TEST the system for normal operation.
- -> No: INSTALL a new air spring solenoid, CLEAR the DTC. TEST the system for normal operation.