Brake Pads - VIN Range: G45704->G99999 (70.40.03): Removal

All vehicles 

CAUTION: Whilst carrying out rear parking brake related service procedures, the tension on the rear parking brake release actuator will need to be released. Failure to follow this instruction may result in the parking brake to function incorrectly or become inoperative.
1. Carry out the parking brake cable tension release.

   For additional information, refer to

2. Remove both rear wheels and tires.

   For additional information, refer to

Vehicles with high performance brakes 

3. Remove the logo badge.
   Fig 1: Locating Logo Badge

   Courtesy of JAGUAR CARS, INC.

All vehicles 

NOTE: Left-hand shown, right-hand similar.
Fig 2: Locating Anti-Rattle Spring
Courtesy of JAGUAR CARS, INC.
4. Remove the anti-rattle spring.
NOTE: Left-hand shown, right-hand similar.
Fig 3: Locating Brake Caliper Retaining Bolt Dust Covers
Courtesy of JAGUAR CARS, INC.
5. Remove the brake caliper retaining bolt dust covers.
CAUTION: The brake caliper must be supported at all times.
NOTE: Left-hand shown, right-hand similar.
6. Detach the brake caliper.
   1. Remove the brake caliper retaining bolts.
   2. Detach the brake caliper.
      Fig 4: Detaching Brake Caliper

      Courtesy of JAGUAR CARS, INC.
NOTE: Left-hand shown, right-hand similar.
Fig 5: Locating Brake Pads
Courtesy of JAGUAR CARS, INC.
7. Remove the brake pads.