Brake Disc - VIN Range: G45704->G99999 (70.10.11): Removal
- Remove the brake pads.
For additional information, refer to BRAKE PADS - VIN RANGE: G45704->G99999 (70.40.03)
- Remove the brake caliper anchor plate.
- Remove and discard the brake caliper anchor plate retaining bolts.
- Remove the brake disc.
- Remove and discard the brake disc retaining clips.
CAUTION:
The brake caliper must be supported at all times.
NOTE:
Left-hand shown, right-hand similar.
NOTE:
If the same brake disc is to be installed, the tip of a hub must be marked with a corresponding part of the brake disc for alignment.
NOTE:
Left-hand shown, right-hand similar.