Brake Caliper - Vehicles With: Standard Brakes, VIN Range: G00442->G45703 (70.55.03): Installation

CAUTION: If brake fluid comes into contact with the paintwork, the affected area must be immediately washed down with cold water.

Install the brake caliper.
- Install new brake caliper upper retaining bolts.
- Tighten to 34 Nm.
  
  Fig 1: Locating Brake Caliper Retaining Bolts
  Courtesy of JAGUAR CARS, INC.
Attach the brake hose.
- Install new sealing washers.
- Tighten to 35 Nm.
  
  Fig 2: Locating Sealing Washers
  Courtesy of JAGUAR CARS, INC.
Attach the parking brake cable.

Fig 3: Attaching Parking Brake Cable
Courtesy of JAGUAR CARS, INC.
Attach the parking brake cable.
1. Reposition the brake caliper lever.
2. Attach the parking brake cable.
  
  Fig 4: Attaching Parking Brake Cable
  Courtesy of JAGUAR CARS, INC.
Remove the brake pedal hold-down tool.
Bleed the brake system.
For additional information, refer to BRAKE SYSTEM BLEEDING - VIN RANGE: G00442->G45703 (70.25.03)
Install both rear wheels and tires.
For additional information, refer to WHEEL AND TIRE (74.20.05) .