LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2008 >> XJ8 Base >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake And Actuation (2003.5-09) >> Diagnosis and Testing >> Parking Brake - VIN Range: G45171->G99999 >> Pinpoint Tests >> PINPOINT TEST G531320p22: BRAKE SWITCH INPUT STATUS PLAUSIBILITY FAILURE >> G531320t97: CHECK THE BRAKE SWITCH CIRCUIT FOR SHORT CIRCUIT TO POWER IN HARNESS

G531320t97: CHECK THE BRAKE SWITCH CIRCUIT FOR SHORT CIRCUIT TO POWER IN HARNESS

  1. Key off.
    Fig 1: Identifying Electric Parking Brake Module Connector Pins 2 (CR32)
    G06387620Courtesy of JAGUAR CARS, INC.
  2. Electric parking brake module connector 2 (CR32) disconnected.
  3. Key on, engine off.
  4. Make sure the brake pedal is not pressed.
  5. Measure the resistance between:
    CONNECTOR REFERENCE CHART

    CR32 connector, harness side Vehicle battery
    Brake switch - signal - Pin 07 Positive terminal
    • Is the resistance greater than 100 Kohms?