G531320t46: CHECK THE HIGH POWER SUPPLY CIRCUIT
- Electric parking brake module connector 2 (CR32) disconnected.
- Measure the voltage between:CONNECTOR REFERENCE CHART
CR32 connector, harness side Vehicle battery Electric parking brake module - battery supply - Pin 01 Negative terminal - Is the voltage between 9 volts - 15 volts?
- Yes: An intermittent fault may be present in the wiring harness. Visually check for chaffed wires or other physical damage to the harness. If no fault is found in the circuit, suspect the following component(s): - EPB module
- No: No supply to the EPB circuit. check and repair the circuit as necessary. For additional information, refer to the wiring diagrams.