Brake Master Cylinder - 3.0L/3.5L/4.2L (70.30.08): Installation

To install, reverse the removal procedure.
- Install a new O-ring seal.
- Tighten to 25 Nm.
  
  Fig 1: Locating O-Ring Seal
  Courtesy of JAGUAR CARS, INC.
Tighten to 17 Nm.

Fig 2: Locating O-Ring Seal Location
Courtesy of JAGUAR CARS, INC.
After installation, bleed the brake system.
For additional information, refer to BRAKE SYSTEM BLEEDING - VIN RANGE: G00442->G45703 (70.25.03)

For additional information, refer to BRAKE SYSTEM BLEEDING - VIN RANGE: G45704->H99999 (70.25.03)