LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2006 >> XJ8 Base >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension (2003.5-09) >> Removal and Installation >> Upper Arm (64.25.31) >> Removal

Upper Arm (64.25.31): Removal

  1. Remove the wheel and tire. Refer to WHEEL AND TIRE (74.20.05) .
  2. Detach the high intensity discharge (HID) sensor link rod.
    Fig 1: Locating High Intensity Discharge (HID) Sensor Link Rod
    G06387301Courtesy of JAGUAR CARS, INC.
  3. Detach the anti-lock brake system (ABS) sensor wiring harness.
    Fig 2: Locating Anti-Lock Brake System (ABS) Sensor Wiring Harness
    G06387302Courtesy of JAGUAR CARS, INC.
  4. Detach the upper arm from the wheel knuckle.
    Fig 3: Locating Wheel Knuckle Bolt
    G06387303Courtesy of JAGUAR CARS, INC.
  5. Remove the upper arm.
    Fig 4: Locating Upper Arm Bolts
    G06387304Courtesy of JAGUAR CARS, INC.