Brake Fluid Reservoir (70.30.16): Removal

CAUTION: If brake fluid comes into contact with the paintwork, the affected area must be immediately washed down with cold water.

NOTE: Make sure the brake fluid reservoir filler cap does not become contaminated.

Fig 1: Locating Brake Fluid Reservoir Filler Cap

Courtesy of JAGUAR CARS, INC.

Remove the brake fluid reservoir filler cap.
Disconnect the brake fluid level sensor electrical connector.

Fig 2: Locating Brake Fluid Level Sensor Electrical Connector
Courtesy of JAGUAR CARS, INC.
Using a suitable suction device drain the brake fluid reservoir.

Fig 3: Locating Brake Fluid Reservoir
Courtesy of JAGUAR CARS, INC.

NOTE: Remove and discard the O-ring seals.

Fig 4: Locating O-Ring Seals

Courtesy of JAGUAR CARS, INC.