G256924t62: CHECK THE LEFT-HAND REAR SIGNAL CIRCUIT FOR SHORT TO B+
- Disconnect the left-hand rear height sensor electrical connector, CV03.
- Measure the voltage between CV03, pin 04 (BR) and GROUND.
- Is the voltage greater than 3 volts?
- -> Yes: REPAIR the short circuit. For additional information, refer to the appropriate SYSTEM WIRING DIAGRAMS article. CLEAR the DTC. TEST the system for normal operation.
- -> No: Go to Pinpoint G256924t63: CHECK THE LEFT-HAND REAR SIGNAL CIRCUIT FOR SHORT TO GROUND .