G256924t3: CHECK THE HEADLAMP TO ASU PWM SIGNAL CIRCUIT FOR SHORT TO GROUND
- Reconnect the battery negative terminal.
- Measure the resistance between CR89, pin 03 (Y) and GROUND.
- Is the resistance less than 10,000 ohms?
- -> Yes: REPAIR the short circuit. For additional information, refer to the appropriate SYSTEM WIRING DIAGRAMS article. CLEAR the DTC. TEST the system for normal operation.
- -> No: Go to Pinpoint G256924t4: CHECK THE HEADLAMP TO ASU PWM SIGNAL CIRCUIT FOR SHORT TO B+ .